NAILSOFTHEDAY Dual Form Pro Mix 6 (Type 22) — a set of top forms with dot application, 144 pcs, 6 types of 12 sizes

The Dual Form Pro Mix 6 (Type 22) set combines 6 types of upper forms, among them:

1. Curve Square — a smoothly curved square without color markings.
2. Stiletto — an elegant pointed stiletto with color markings.
3. Square — a classic square with color markings
4. Half Square — a shortened square with colored markings.
5. Maxi Ballerina — elongated ballerina with color markings.
6. Maxi Arch Square — a square with a pronounced arch without color marking.

1. Curve Square/Gryfozna
Griffon shape for a short and medium square with an arch of 50%.

Suitable for modeling/correction/restoration:
• short or medium square
• oval
• not a long almond
• for onychogryphous type of nail plate (which grow downwards)
• for arched natural nails

Features:
• an arched shape that gives the natural shape of salon nails
• the built-in architecture allows you to correctly lift the end (for GRIPHOSE nails, it is important to understand the ratio of length and lifting of the end, which is what this shape gives)
• great for working with index fingers that require increased stability and competent lifting of the material
• this shape allows you to lift the free edge, creating a harmonious look even for medium length
• allows you to preserve natural strength and balance between shape and length
• with the given upper forms, the modeled nails look elegant, thanks to the possibility to adjust the natural inclination of the plate down
• suitable for clients who want a stylish and practical manicure with a sustained length

2. Stiletto/Stiletto
The percentage of the arch is about 40-45%

Suitable for:
• on almost all types of nails
• stiletto/long almond/ballerina
• for modeling elegant and elongated nail shapes that emphasize the length and architecture of the nail
• for a short square with a flat or standard nail plate
• also shapes can be suitable for springboards for a very short square or oval, provided that the nails are not too arched

Features:
• arch percentage: about 40-45%, which provides an optimal balance between strength and aesthetics and creates a perfectly symmetrical profile that looks harmonious even at maximum length
• forms have a curved longitudinal arch with the apex closer to the center and straight lateral ribs
• length: Focused on long nails, which allows you to implement complex and sophisticated designs
• maximum tapering and lengthening to the free edge, ideal for customers who prefer elegant and geometrically correct shapes
• this form provides stability even with significant elongation thanks to the raised arch and correctly distributes the load along the entire length of the nail

3. Square/Short, medium square
The percentage of the arch is about 35% and 40% in the stress zone.

Suitable for:
• for modeling a short / medium / long square
• almonds
• on a flat or standard natural nail plate
• for springboard nails - only a short square

Features:
• shapes – a natural saloon square, with parallel side edges without narrowing
• the longitudinal arch is slightly curved, with the apex closer to the center
• has a less pronounced arch, which makes the shape more natural
• the side walls are straight from the side, which makes it possible to build up a medium/long square, but on the nail plate with a small arch
• forms have a classic transverse arch, 40% in the stress zone (not suitable for arched natural nails)
• a great option for everyday manicure due to its practicality and versatility

4. Half Square/Arch form for the free edge
Arch drainage: 50% or more.

Appointment:
• used to create a clear arched shape in the area of ​​the free edge, regardless of the chosen shape (square or almond)
• suitable for clients with natural nails of medium or high arch.
• for medium and long lengths
• on trampolines - from short to long modeling

Features:
• have parallel side ribs without narrowing, transverse arch 50% longitudinal arch is straight
• according to the standard, they are used for work in the technology of substrates with the need to complete the architecture

5. Maxi Ballerina/Modern ballerina/almond
Arch percentage: 50-60%.

Appointment:
• for modeling medium and long nails in modern "ballerina" or elegant almond shapes
• ideal for arched natural nails
• for nails growing upwards (springboards) - any length - from short to long
• for classic and flat nails - long
• for gryphons (only of long length and wearing no more than 2-3 weeks)

Features:
• combines the smoothness of the almond and the clarity of the lines of the “ballerina” shape
• ideal for customers who prefer stylish long and medium shapes
• the longitudinal arch is curved with a smooth apex closer to the center
• the side walls are straight and slightly narrowed to the free edge, which corresponds to the given shape of the Ballerina and looks very beautiful and harmonious 

• transverse arch at the highest point 60%
• the apex is shifted, which provides balance and increased resistance to mechanical loads
• forms are elastic, hold their shape well and are easily removed after polymerization, they do not bend when pressing the architecture with tweezers or special fine pliers
• apex with a smooth rise, allows you to make a perfect impression in the cuticle area and get a perfect architecture in the side view

6. Maxi Arch Square
Arch percentage: about 60%.

Appointment:
• used for modeling long nails in the shape of an arched square
• great for clients with a natural nail plate that has a high arch
• for nails growing upwards (springboards) - any length - from short to long
• for classic and flat nails - long
• for gryphons (only of long length and wearing no more than 2-3 weeks)

Features:
• have parallel lateral ribs without narrowing, the longitudinal arch is straight with a smooth rise to the apex closer to the center, the transverse arch at the highest point is 60%
• the apex is shifted, which provides balance and increased resistance to mechanical loads
• allows you to create a perfectly even, arched and geometrically clear free edge

• forms are elastic, hold their shape well and are easily removed after polymerization with any material, they do not bend when pressing the architecture with tweezers or special fine pliers.
• apex with a smooth rise, allows you to make a perfect impression in the cuticle area and get a perfect architecture in the side view
• improved form will create nail architecture without extra effort even for beginners in modeling

Technology of use:

degrease the nail plate; apply NAILSOFTHEDAY DEHYDRATOR dehydrator; then NAILSOFTHEDAY ULTRABOND ;

make an elastic layer of the base with Builder base strong gel, SCOTCH BASE or Rubber base with a thin and rubbing layer, then polymerize.

We choose the tips of the required size for the nail plate, and on its inner side we apply the selected material for modeling, we recommend applying NAILSOFTHEDAY Camouflage builder gel, Smart Jelly gel, Ariel builder gel, Shell builder gel or Build gel Flower, Potal. We fix it on the nail plate using NAILSOFTHEDAY Nail lamp or a clip.

We polymerize in a 36/48 W hybrid lamp for 1-2 minutes (depending on the selected material, length and thickness). After complete polymerization of the material, remove the tips, slightly pinching from the sides for quick removal.

Adjust the shape with a saw and carbide cutter, as well as sawdust under the nail. Remove the remains of the dispersion and dust from the finished nail with a special NAILSOFTHEDAY Nail Prep liquid.

We recommend covering it with a No stress top no wipe top. Polymerization: UV – 120 seconds, LED – 60 seconds.